Là c'est un peu plus problêmatique que la transformation de "s" en "sec" ? ça pourrait venir de ce type d'erreur ? Faut-il que je recalibrer chaque composant comme dans le tutoriel de mise en route ?
Code : Tout sélectionner78 Warnings:
Warning: MSQ Units Mismatch for knk_tadv! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for amap_table2! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Disable"' for parameter: enable_pollADC is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for amap_table1! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: Value in .msq '"5"' for parameter: can_poll_id is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:can_poll equal to the proposed Disabled
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:flexport equal to the proposed PA0
Warning: Value in .msq '"Remote Port3 Bit 0"' for parameter: knkport_remote is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Off"' for parameter: feature4_0vanos is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:spk_config_spka equal to the proposed Tachout
Warning: Value in .msq '"Disabled"' for parameter: AMCOption is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Local"' for parameter: flexFuelRemote is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for knk_trtd! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Master"' for parameter: can_poll_slave is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Off"' for parameter: spk_conf2_ngc is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for IACcrankxt! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Off"' for parameter: feature4_0mindwl is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Fuel&spark cut"' for parameter: RevLimOption is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:EAEOption equal to the proposed ON
Warning: Value in .msq '"PWM0"' for parameter: flexportRemote is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Local"' for parameter: knk_remote is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:rtbaroport equal to the proposed SPAREADC
Warning: Value in .msq '"Port Injection"' for parameter: injType is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:IdleCtl equal to the proposed 15-Minute IAC
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:ego2port equal to the proposed SPAREADC
Warning: Value in .msq '"On"' for parameter: feature4_0maxdwl is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Remote Port3 Bit 0"' for parameter: tsf_remote_port is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for EAEAWCKPAbins! % TPS found in current configuration, kpa found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Remote Port3 Bit 0"' for parameter: tss_remote_port is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Normal"' for parameter: boost_ctl_settings_invert is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for EAESOCKPAbins! % TPS found in current configuration, kpa found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Local"' for parameter: tsf_remote is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for smap_injadv3! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fc_ego_delay! s found in current configuration, seconds found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for pwmidle_targ_ramptime! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for pwmidle_close_delay! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for pwmidle_shift_open_time! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: baroCorrVals array size does not match the currently loaded configuration,
rescaled .msq values to match configuration.
Warning: MSQ Units Mismatch for pwmidle_pid_wait_timer! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: baroCorrDelta array size does not match the currently loaded configuration,
rescaled .msq values to match configuration.
Warning: Value in .msq '"Local"' for parameter: tss_remote is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:tacho_opt3f equal to the proposed IGN
Warning: Value in .msq '"78Hz"' for parameter: pwmidleset_hz is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Local"' for parameter: N20remote_input is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:launch_opt_pins equal to the proposed SPAREADC
Warning: MSQ Units Mismatch for RotarySplitLoad! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Remote Port1 Bits 0+1"' for parameter: N20remote_outport is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for smap_table1! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: Value in .msq '"Rotary off"' for parameter: RotarySplitModeOn is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Disabled"' for parameter: RotarySplitModeRX8 is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Local"' for parameter: N20remote_output is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:N2Oopt_pins2 equal to the proposed PT7+6
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:N2Oopt_pins equal to the proposed Flex
Warning: Value in .msq '"Remote Port3 Bit 0"' for parameter: N20remote_inport is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for idleadvance_delay! s found in current configuration, sec found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim1! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: idleadvance_loads array size does not match the currently loaded configuration,
rescaled .msq values to match configuration.
Warning: MSQ Units Mismatch for smap_injadv2! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for smap_injadv1! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:testop_coil equal to the proposed CoilA
Warning: Value in .msq '"Neither"' for parameter: test_addinj is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"Off"' for parameter: testmode is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: idleadvance_curve array size does not match the currently loaded configuration,
rescaled .msq values to match configuration.
Warning: MSQ Units Mismatch for smap_table3! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: Parameter in .msq, but not valid for current firmware: No options found for Bit EcuParameter:testop_inj equal to the proposed Neither
Warning: Value in .msq '"Off"' for parameter: iactestlock is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: Value in .msq '"run"' for parameter: iactest is of a type that is not compatible with the current firmware.This will be ignored, please correct manually.
Warning: MSQ Units Mismatch for fmap_trim1doz! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_table3doz! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_table1doz! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_table1! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_table3! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim2! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim4! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim3! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim3doz! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim2doz! % TPS found in current configuration, % found in MSQ, values were not converted to new units.
Warning: MSQ Units Mismatch for fmap_trim4doz! % TPS found in current configuration, % found in MSQ, values were not converted to new units.