Support officiel Megasquirt, Tech Edge WBO2, Tuner Pro, AutoSport Labs et Fenixecu 

  • XR25 Diag Renault avec Tuner Pro V5

  • Partie relative à l'utilisation générale des logiciels
Partie relative à l'utilisation générale des logiciels
 #1587  par red21
 25 juil. 2011 22:57
Manu,
Thanks for sticking with this, hopefuly I have given you some answers that will give some insight in to this problem
Can you tell me which revision level you use for XR25 cable drivers ?
To be honest I don't know or know how to check which revision level
Also which OS you use ?
I am using Vista 32bit(?)
You talk about "COM ports & USBports".
AS you can see from the screen shot the "USB serial port COM5" appears in the COM & LTP list and not inthe USB list??
Image http://i200.photobucket.com/albums/aa17 ... mport2.jpg
As you can see from this shot COM5 doesn' appear in the list in TPro,
Image http://i200.photobucket.com/albums/aa17 ... omport.jpg
but after a bit of playing around managed to get it to appear
Image http://i200.photobucket.com/albums/aa17 ... mport3.jpg
Do you launch TunerPro AFTER connecting the cable to your computer ? If you first connect the XR25 diag probe to the computer (and NOT to the car), then wait for COM is given by windows, then launch TPv5, your COM port MUST appear in the "FenixParser" plug-in in TunerPro RT.
I have tried it various ways, before and after I managed to get "COM5" to appear but it still will not work?
One question I that did crop up is, Has the "dll file" installed correctly and in the right location????
Image http://i200.photobucket.com/albums/aa17 ... llfile.jpg

Rich
 #1592  par Manu
 30 juil. 2011 15:08
Hi Rich,

Can you post some bigger screenshots ? I can't see anything on the one presents here.

Regards,
Manu
 #1598  par red21
 31 juil. 2011 00:23
For some reason the forum (The extension jpg is not allowed) or photo site linking will not allow a larger picture to be shown ???
Can I e-mail them to you?

Rich
 #1618  par Manu
 03 août 2011 19:24
?? J'ai raté quelque chose ?
;-)
 #1622  par eruaf
 05 août 2011 21:00
Bonsoir,

Quelques nouvelles de mes mésaventures,

Grâce à l'aide de Manu, mon logiciel TunerPro RT fonctionne maintenant.... pour une 21 2RM normale (avec calculateur Fenix 1)

Il s'agissait d'un mauvais paramétrage du logiciel et de mon inexpérience pour le faire fonctionner. Merci encore à Manu.

Par contre, comme ma 21 fonctionne avec un calculateur Fexix 3B, TunerPro ne m'est d'aucune utilité. ca c'est vraiment dommage !

Je lance donc un appel aux bonnes volontés pour que ceux qui possèdent des connaissances les transmettent à Manu afin qu'il puisse réaliser un fichier ADX pour Fenix 3B.
Cela rendrait service à bons nombres d'utilisateurs frustrés.

Allez, un petit effort pour le bien de la communauté.

Amicalement,

Eruaf
 #1623  par Rom$
 06 août 2011 17:17
Manu a écrit :?? J'ai raté quelque chose ?
;-)
Il demandait si les photos fonctionnaient et j’ai dit que oui ;)
 #1678  par Mr l'invité
 29 août 2011 19:27
Bonjour à tous ;)

J'ai moi même un problème de dialogue avec le câble usb/xr25. :(

J'ai récemment installé tuner Pro RT et suivi le "tutoriel" de paramétrage ainsi que l'installation du driver pour le câble.
Tout semble correct, mais malheureusement je n'ai aucune indication qui bouge lorsque je lance l'acquisition des données. (diag sur clio16v).

Dans mon paramétrage de Tuner pro RT, je n'ai pas le choix du port USB, il n'y en a qu'un seul qui apparait (comme dans la capture écran du tuto de Manu) COM1.

Dans l'état des périphériques sous Windows j'ai bien mon câble XR25 qui apparait et qui se trouve sur le Port#0001, hub#0005.

Où est ce que je me suis planté ?

D'avance je vous remercie pour l'aide que vous pourrez m'apporter.

;)
  • 1
  • 6
  • 7
  • 8
  • 9
  • 10